%20(004).png){kind=small}
Tablet Water Dispenser
Directions for Use:
Preparing the Dispenser:
Ensure the hot tub water is balanced (pH: 7.2–7.6, Total Alkalinity: 80–120 ppm).
Remove the lid or cap from the dispenser.
Insert the appropriate sanitizing tablets (DO NOT MIX different types of tablets inside the dispenser).
Securely close the lid or cap.
Adjusting Chemical Release Rate:
The dispenser features an adjustable vent or dial at the base to control the release of sanitizer.
For smaller hot tubs (under 1,500L) – Set to a lower flow rate.
For larger hot tubs (over 1,500L) – Increase the flow rate.
Monitor sanitizer levels and adjust accordingly.
Placing the Dispenser:
Place it in the water, allowing it to circulate naturally.
Monitoring & Maintenance:
- A pop up mechanism will let you know when the dispenser is empty and new tablets are needed.
Regularly check sanitizer levels using test strips or a digital tester.
Refill the dispenser when tablets dissolve completely.
Rinse the dispenser with clean water during refills to prevent buildup.
DO NOT leave an empty dispenser in the water – remove and store until refilled.
This floating or in-line dispenser is designed for controlled and consistent release of sanitizing chemicals in hot tubs, spas, and small pools. It is compatible with chlorine tablets, bromine tablets, and multifunction tablets.
For optimal results, test water regularly and follow the recommended sanitizer levels as per your hot tub manufacturer’s guidelines.