pH Plus (1KG)
This easy-to-use solution raises the pH level in your water, helping to stabilize the overall water balance and prevent fluctuations.
By maintaining the proper pH level, you’ll protect your hot tub’s surfaces and equipment while ensuring a more comfortable and enjoyable soak.
Keep your water clear and balanced with pH Plus for a worry-free hot tub experience!
Ideal pH levels are between 7.4 and 7.6.
Test the pH of your spa water at least twice per week, more often if you are located in an area with soft water.
Test the Water:
Use a test strip or kit to check the current total alkalinity level of your hot tub water. The ideal range is typically between 80-120 ppm (parts per million).
Calculate the Amount Needed:
Refer to the product label for specific instructions on how much Total Alkalinity Plus to add based on your hot tub’s water volume and current alkalinity level. Generally, you'll need 1-2 ounces per 100 gallons to raise alkalinity by 10 ppm.
Turn On the Jets:
Activate the hot tub jets to ensure good water circulation, helping the Alkalinity Plus dissolve and distribute evenly.
Add the Alkalinity Plus:
Slowly pour the recommended amount of Total Alkalinity Plus directly into the hot tub water, ideally near the water's edge for better distribution.
Wait and Re-Test:
Allow the water to circulate for at least 15-30 minutes. Then, re-test the alkalinity levels and, if necessary, add more Alkalinity Plus in small increments until the desired level is achieved.
Adjust pH if Needed:
After adjusting alkalinity, check the pH level. If the pH is out of range, use a pH increaser or decreaser to adjust accordingly.Never add product when pool/spa is being used. Allow 15 minutes before using pool/spa.